Jeep® 07-10 Wrangler JK Tie Rod Flip Kit
Jeep® 07-10 Wrangler JK Tie Rod Flip Kit
This high steer kit was designed to correct steering geometry with a
lifted Jeep Wrangler JK. The kit was designed to be used with the
Clayton Off Road 3.5 and 4.5 inch lift kits and welding is required to
install this kit. The kit also raises the trackbar and will add
clearance between the trackbar and differential cover. It also
strengthens the trackbar bracket by bolting our ¼ bracket and welding
it to the front axle.
Note - This new ¼ trackbar bracket is designed to be bolted into the
stock location, then welded for superior strength. It also incorporates
a new relocated lower swaybar mount. This bracket was designed to be
installed with the three (3) supplied 3/8 bolts, and one (1) 9/16 bolt
with spacer and allows for temporary driving without welding. Basically
you can drill and install this kit in your driveway, then drive to a
certified welder, and have him weld both sides of the bracket.
Parts List :
· OEM style drag link
· CNC machined insert
· Metric locknut
· ¼ trackbar bracket
· 9/16 grade 8 bolt with spacer
· (3) 3/8-16 grade 8 bolt, lock washer and nut
Tools Required:
· Welder
· Grinder
· ½ electric drill with 7/8 drill bit
· standard hand tools to remove and install bolts
· CNC machined insert
· Metric locknut
· ¼ trackbar bracket
· 9/16 grade 8 bolt with spacer
· (3) 3/8-16 grade 8 bolt, lock washer and nut
Tools Required:
· Welder
· Grinder
· ½ electric drill with 7/8 drill bit
· standard hand tools to remove and install bolts
Customers who bought this product also bought
Send to friend
Throughout this web site all the preceding marks & logos are used for identification purposes only. AtoZ Fabrication.com has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation or Ford Motor Company. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation or Ford Motor Company.