AtoZ Fabrication :: Jeep Driveline :: Jeepï¾® Vehicle Axles :: Danaï¾® Model 30 Axle :: Reid Racing Forged Heavy Duty Flat Top Dana 30/44 Knuckles (Wrangler TJ Style)

Printable version

Reid Racing Forged Heavy Duty Flat Top Dana 30/44 Knuckles (Wrangler TJ Style)

Part Number D30001JX1

Weight 30.00 lbs

Choose Your Side

Priced From: $258.95

Quantity

JEEP Heavy Duty Flat Top Dana 30 / Rubicon Knuckles

The new Dana 30 / Rubicon 44 knuckle will transform late model Jeep axles into true contenders. The Dedenbear knuckle adapts these axles to use early style Chevy & Jeep Dana 44 "outers". Early outers use tapered roller bearings eliminating the problematic unit bearings and allows standard lockout hubs to be used. Bigger brakes, more lug pattern options, and better aftermarket support come along as part of the conversion. The knuckles are also flat topped and drilled for high steer arm use. Some companies give you kits with expensive proprieatary parts that you have to wait weeks on for replacements. With this you can use standard parts found at any parts center.

Uses stock pre-1987 Dana 44 Chevy or Jeep spindles, hubs, rotors, calipers, stub shafts, and lockouts.
Fits YJ, TJ, XJ, WJ, ZJ, and MJ Dana Model 30 axles and TJ Rubicon Dana Model 44 axles.
Easy bolt-on installation with no machining required.
Aftermarket high strength stub shafts and lockouts can be used.
Eliminates wimpy non-serviceable unit bearings.
Adds conventional lockout hubs.
Better fuel economy and less wear and tear when in 2 wheel drive.
More lug patterns available including 5x5.5, 6x5.5, and 8x6.5.
Cast from high strength ductile iron.
Beefed up with extra material and ribbing.
Flat tops machined and drilled for high steer arms, all angle corrections milled directly into the knuckle.
Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures.
Tapered tie rod holes accept factory tie rod ends.
Tie rod holes can be drilled to accept 3/4" heim ends.
Powder coated bright orange for long lasting looks.
Machined to clear CTM u-joints without removing the grease fittings.

C's for off-road use only. There is no warranty on this product.

Question or Custom Quote for this Product

Customers who bought this product also bought

"Customers who bought this Dedenbear Products (Reid Racing) product were also interested in..."

Fan Clutch (Tempatrol) for Jeep 1981 - 1990 J-10 SJ w/ 4.2L - less serpentine belt (Part # J5362170) Priced From: $56.99	Steering Tie Rod End for Jeep 1993 - 1998 Grand Cherokee ZJ w/ 4.0L engine; w/ Right Hand Thread; To Tie Rod (inner) (Part # 52005740) Priced From: $16.99	Front Exhaust Pipe for Jeep 1993 - 1995 Cherokee XJ w/ 2.5L engine (Part # 52019357) Priced From: $105.00
Rear Brake Shoe & Lining Set for Jeep 1991 - 1992 Comanche MJ 10" x 1-3/4" (Part # 4713365) Priced From: $30.99	Oil Slinger for Jeep 1987 - 2000 Cherokee XJ w/ 4.0L engine (Part # J3173076) Priced From: $1.99	Camshaft Sprocket (Right) for Chrysler 1998 - 2003 New Yorker w/ 2.7L engine; Intake camshaft; Right (Part # 4792306) Priced From: $24.99