AtoZ Fabrication :: Jeep Engine :: Jeep '87-'95 Wrangler YJ 2.5L 4-Cylinder Motor Mounts

Jeep '87-'95 Wrangler YJ 2.5L 4-Cylinder Motor Mounts

Jeep '87-'95 Wrangler YJ 2.5L 4-Cylinder Motor Mounts

Jeep '87-'95 Wrangler YJ 2.5L 4-Cylinder Motor Mounts
1" MM Lift 2" MM Lift
Part Number A2569-01
Weight 5.00 lbs
Choose Mount Type
Choose MM Height
Engine Year
 
Priced From: $74.95
Quantity   

Jeep Motor Mounts(Pair)
The Brown Dog has friends with Wrangler YJs from the late 80s who have experienced a sagging motor mount. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most after-market mounts, too.

High Performance Design.
We use steel and feature double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull a set of mounts off the shelf and put them through our 20-Ton Press Test. We have yet to see a Brown Dog MM or MML with a structural failure.

Featuring Classic Polyurethane Bushings.

The Classic Polyurethane bushings in this set of Brown Dog motor mounts will give your rig a sportier feel. If the bushings ever start to wear, replacements are available from Brown Dog Offroad. Prefer Ultra-Flex Rubber bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which bushings are best for you? Click here.
 
Installation Notes
Mounts bolt directly to the pylons, in the identical position of the stock mounts. Engine remains in stock position. 
Carefully inspect engine bracket for any excess wear, especially cracks. These motor mounts are significanly stronger than the originals so your brackets need to be in good shape.


Application Notes
Fits Jeep vehicles below with engine bracket opening* between 2.75 and 3.25".
*Measure between bracket arms where the bracket and mount meet.
  • Jeep Wrangler YJ, 4-Cylinder, 1987-1990
  • Jeep Wrangler YJ, 4-Cylinder, 1991-1995

 

* Note: If using original Jeep motor mounts, both motor mounts will need to be replaced with a pair of TJ (not YJ) motor mounts or a pair of Brown Dog motor mounts. On YJ, carefully inspect the "cradle" holding the right motor mount for cracks or other signs of wear. (Cradle is squeezed between pylon and motor mount on driver side only.) If this part needs replaced, order Brown Dog part number CR2569. TJ 2.5/2.4 do not have this cradle.

Question or Custom Quote for this Product

Your Name: *
Your Email Address: *
Telephone Number: *
Question(s): *
Verification Code:  
Enter Code As It Appears Above: *
   

Customer feedback

Customer Reviews

There have been no reviews for this product.

Send to friend

: *
: *
: *