Skid Row engine/transmission skid plates are available for all 1987-2008 Jeep Wranglers. They are designed to provide complete coverage for your vulnerable engine oil pan, transmission, AND the front portion of your stock exhaust system. This easily installed skid plate provides the complete protection you need to feel confident while on the trail.

These are made of 3/16" thick steel that is laser cut and CNC folded for consistent quality that sets the standard for Jeep skid plates. They are also reinforced with 1/4" thick steel angle along the driver's side to provide plenty of strength while easily clearing both your stock exhaust system and your drive shaft. The skid plate is a semi-gloss black powdercoat for an attractive finish that's easy to touch up when necessary.


Please Note the following:

• These skid plates do NOT work with long arm suspension systems. There are engine/transmission skids available specifically for Jeeps with long arm suspension systems.
• If you have an aftermarket exhaust header that goes under your engine or transmission, this skid plate will not fit properly. An example would be the Borla exhaust header for 1997 model TJ's.
• These skid plates work just fine with transfer case drops and can be mounted to Jeeps with raised transfer case skid plates such as Tera Mfg's Belly-Up kit or Nth Degree's Tummy Tucker. However, a slight modification will be needed to mate our skid plate to the Tummy Tucker.
• If you're unsure, it's best to contact us and ask.